Connect a new printer, Change network settings, Tips for setting up and using a networked printer – HP 6510 User Manual
Page 40
Connect a new printer
To connect a new printer from the printer software
If you haven't finished connecting the printer to your computer, you need to connect it
from the printer software. If you want to connect another new printer of the same model
to your computer, you don't need to install the printer software once again. Do one of
following according to your operating system:
1.
On Windows:
a.
From the Start menu on your computer, click All Programs, and then click HP.
b.
Click HP Photosmart 6510 series, click Printer Connections and Software, and
then click Connect a new printer
c.
Follow the instructions on the screen.
2.
On Mac:
a.
From the Home screen on the printer display, touch the right directional key.
b.
Touch the Wireless icon, and then touch Wireless Setup Wizard.
c.
Follow the instructions on the screen to connect the printer.
d.
Use HP Setup Assistant in Applications/Hewlett-Packard/Device Utilities to
change the software connection to this printer to wireless.
Change network settings
If you want to change the wireless settings that you previously configured to a network,
you need to run the Wireless Setup Wizard from the printer display.
To run Wireless Setup Wizard to change network settings
1.
From the Home screen on the printer display, touch the right directional key, and
then touch the Wireless icon.
2.
On the wireless menu, touch Wireless Setup Wizard.
3.
Follow the instructions on the screen to change the network settings.
Tips for setting up and using a networked printer
Use the following tips to set up and use a networked printer:
•
When setting up the wireless networked printer, make sure your wireless router is
powered on. The printer searches for wireless routers, then lists the detected
network names on the display.
•
To verify the wireless connection, touch the Wireless button on the control panel. If
it shows Wireless Off, touch Turn On.
•
If your computer is connected to a Virtual Private Network (VPN), you need to
disconnect from the VPN before you can access any other device on your network,
including the printer.
•
Learn more about configuring your network and the printer for wireless printing.
Chapter 8
38
Connectivity