Humax PVR-9200T - Manual (Page 66)

**
10.4 Antenna Power
When you connect an active antenna to the ANTENNA IN connector on the rear of the product.
1. Press MENU button.
2. Select Installation using the button and press the OK
or button.
3. Select Antenna Power from Installation menu using the
button.
4. Press the OK or button to select On or Off .
On 5V power supply from the active antenna cable.
Off No power supply.
**
Note:
• Active antenna is the portable or indoor antenna which needs power supply from the set top box bacuse it does
not have power cord for itself.
• The default value is Off.
GB 65