HP 37717C - Manual (Page 10)

10
Option Tick
code one
7. Optical interfaces options
Choose one option (if required). All optical interfaces receive at 1310 and
1550 nm.
Provides optical interfaces. Must also order STM-0e/STM-1e option A3R (section 2),
and appropriate optical adaptor options (section 12).
STM-1 optical interfaces only (for testing STM-1 only) *
● 155 Mb/s optical interface: 1310 nm,
−
9 dBm output. .............................................................................. UH1 reserved
optical
slot
STM-4/OC-12c test and optical interfaces
Provides optical interfaces, plus optical power measurement and STM-4 test
functionality, ie, for STM-4 overhead access. Must also order 52/155 Mb/s
option A3R or 120 (section 2), and appropriate optical adaptor options (section 12).
● 622/155/52 Mb/s optical interfaces: Dual wavelength at 1310 nm,
−
10 dBm ...................................... 130†
output plus 1550 nm,
−
1 dBm output; includes STM-4/OC-12c, overhead access,
thru mode and optical power measurement.
● 622/155/52 Mb/s optical interfaces: 1310 nm,
−
10 dBm output; includes ........................................... 131†
STM-4c/OC-12c, overhead access, thru mode and optical power measurement.
† Option 130/131 does not support option UKZ at present.
Please refer to module interworking section (pages 6 and 7).
STM-4 test and optical interfaces
Provides optical interfaces. Must also order STM-1e option A1T (section 2),
and appropriate optical adaptor options (section 12).
622/155 Mb/s optical interfaces: Dual wavelength at 1310 nm, 1550 nm ...................................... USN*
−
10 dBm output plus 1550 nm,
−
1 dBm output; includes overhead access,
thru mode and optical power measurement.
622/155 Mb/s optical interfaces: 1310 nm,
−
10 dBm output; ........................................................... UKT*
includes overhead access, thru mode and optical power measurement
(easily upgradeable to dual wavelength).
* Available with ATM options 0YK, USL, UKZ only. When option UKZ (and A1T)
are present, these interfaces also provide OC-3c capability.
Option No of Tick if
code slots required
8. SONET/SDH binary interfaces option
Choose if required. Must also order STM-4 test and optical interfaces
option 130 or 131 (section 7)
.
● 622/155 Mb/s NRZ interfaces. 50 ohm ECL Tx data and Tx clock outputs, plus ................................ 0YH 1
Rx data and Rx clock inputs.