Husqvarna 357XPG E-tech - Manual (Page 42)

42 – English
Technical data
Bar and chain combinations
The following cutting attachments are approved for the models Husqvarna 357XP and 359. The saw chain Husqvarna
H30 is designed to minimize kickback (classified saw chain of low kickback type according to ANSI B175.1).
Saw chain filing and file gauges
Bar Chain
Length, inch Pitch, inch Gauge, mm Max. nose radius Type
Length, drive
links (no.)
13 0,325 1,5 10T
Husqvarna H25
56
15 0,325 1,5 10T 64
16 0,325 1,5 10T 66
18 0,325 1,5 10T 72
20 0,325 1,5 12T 78
13 0,325 1,3 10T
Husqvarna H30
56
15 0,325 1,3 10T 64
16 0,325 1,3 10T 66
18 0,325 1,3 10T 72
20 0,325 1,3 10T 78
15 3/8" 1,5 11T
Husqvarna H42
56
16 3/8" 1,5 11T 60
18 3/8" 1,5 11T 68
20 3/8" 1,5 11T 72
24 3/8" 1,5 11T 84