Husqvarna 357XPG E-tech - Manual (Page 3)

CONTENTS
English – 3
Contents
KEY TO SYMBOLS
Symbols on the machine: ..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents ............................................................... 3
INTR ODUCTION
Dear Customer , .................................................... 4
WHA T IS WHAT?
What is what on the chain sa w? ........................... 5
GENERAL SAFETY PRECA UTIONS
Bef ore using a new chain saw .............................. 6
Important .............................................................. 6
Always use common sense .................................. 7
Personal protective equipment ............................. 7
Machine
′
s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBL Y
Fitting the bar and chain ....................................... 17
FUEL HANDLING
Fuel ...................................................................... 18
Fuelling ................................................................. 19
Fuel safety ............................................................ 19
ST ARTING AND STOPPING
Star ting and stopping ........................................... 20
W ORKING TECHNIQUES
Bef ore use: ........................................................... 22
General working instructions ................................ 22
How to avoid kickback .......................................... 29
MAINTENANCE
Gener al ................................................................. 30
Carburettor adjustment ......................................... 30
Carburettor with movement limiters ...................... 30
Carburettor without movement limiters ................. 31
Checking, maintaining and servicing chain saw
safety equipment .................................................. 33
Muffler .................................................................. 35
Starter .................................................................. 35
Air filter ................................................................. 36
Spark plug ............................................................ 37
Lubricating the bar tip sprocket ............................ 37
Needle bearing lubrication ................................... 37
Adjustment of the oil pump ................................... 37
Cooling system ..................................................... 38
”Air Injection” centrifugal cleaning ........................ 38
Winter use ............................................................ 38
Heated handles .................................................... 39
Maintenance schedule ......................................... 40
T echnical data
T echnical data ....................................................... 41
Bar and chain combinations ................................. 42
Saw chain filing and file gauges ........................... 42
EC-declaration of conformity ................................ 43