Humminbird Matrix 20 - Manual (Page 48)

43
Select Views
(Advanced)
Select Views sets the available views to either
hidden or visible in the view rotation. The view will
be removed from the view rotation if it is set to
Hidden and will be displayed in the view rotation if it
is set to Visible. The following views are available:
• Self Test
• Accessory Test
• Side Beam View (QuadraBeam® Only)
• Sonar View
• Sonar Zoom View
•SplitSonarView(DualBeamPLUS™andQuadraBeam®only)
• Big Digits View.
The display status of these views can be changed only when in Advanced User Mode
(see Setup Menu Tab: User Mode.)
To Select Views:
1. Make sure you are in Advanced User Mode, then highlight Select Views on
the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.
3. The Select Views submenu will appear, showing a list of all Views that can
be hidden or made visible. Use the UP or DOWN Cursor keys to select a
particular view, then use the RIGHT or LEFT Cursor keys to change the View
status from Visible to Hidden or vice versa.
Select Views