Assembly – Husqvarna 968999515 User Manual

Page 10

ASSEMBLY

FRONT WEIGHTS
(See Figure 8)

1. Remove foot rest from the front of the mower.
2. Remove the two (2) front bolts that secure

the caster casting to the sides of the frame.

3. Remove the two (2) bolts that secure the

caster castin to the bottom of the frame.

4. Place weight bracket on the front of the

frame.

FIGURE 8

539113177 (CAST WEIGHT)

539113182
(SCREW #10-12 X 1)

539976979
(NUT, 3/8-16, NYLOC)

CAUTION

DO NOT operate mower with grass catcher,
unless the front weights are installed.

539990588
(BOLT, 3/8-16 X 2, GR5)

539113225
(WEIGHT BRACKET)

5. Secure the weight bracket to the frame with

the four (4) previously removed bolts.

6. Install weight to the weight bracket with two

(2) bolts (539990588) and two (2) nuts
(539976979).

7. Install foot rest on the weight bracket with six

(6) (539113183 and two (2) (539113182)
screws.
NOTE: the shorter screws go in the center.

FOOT REST

PREVIOULY REMOVED
HARDWARE

539113183
(SCREW #10-12 X 1 1/4)