Hitachi DZ-HS500A - Manual (Page 64)

English
64
3
SWITCHING QUALITY OF STILL IMAGE (QUALITY)
You can switch the still recording quality.
1
Press the MENU button, use the f/e/
d/c/A buttons to choose “Quality” on
the “Record Functions Setup” menu screen,
and then press the A button.
2
Choose the option you want, and then press
the A button.
3
Press the MENU button to end the setting.
Note :
• The still quality setting will be stored in memory even
when the DVD video camera/recorder is turned off.
1<>2/3
RECEIVING IMAGE FROM ANOTHER DEVICE (INPUT SOURCE)
If you wish to input an image from another device to this DVD video camera/recorder, you must
first switch the setting on the DVD video camera/recorder.
Refer to the explanation starting from
page 115 on how to connect the DVD video camera/recorder
to other devices or record images input from them.
1
Press the MENU button, use the f/e/
d/c/A buttons to choose “Input
Source” on the “Record Functions Setup”
menu screen, and then press the A button.
2
Choose “LINE”, and then press the A
button.
3
Press the MENU button to end the setting.
Note :
The “Input Source” setting will return to “CAMERA”
whenever the DVD video camera/recorder is turned off.
It is recommended that you use “FINE” when recording vital images ( p. 156 “Size And Quality
Of Photos”).
Setting Content On-screen display
CAMERA Usually select this option No display
LINE To input image from another device L IN
S LINE To input S-VIDEO signal from another device S IN
HDD HDD
DZ-HS500A_US.book 64 ページ ２００７年１月１５日 月曜日 午後５時０分