Hitachi DZ-HS500A User Manual
Page 142
English
142
DVD-R*, Input Source
cannot be changed.
Once a DVD-RW (VF-mode)/DVD-R has been recorded in the
16:9 mode, the input source will not be changeable.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
DVD-R*, Video mode
and 16:9 mode cannot
be changed.
With DVD-RW (VF-mode)/DVD-R, the movie quality mode and
16:9 mode once used for recording cannot be changed.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
DVD-RAM, Finalize is
not required.
This message will appear if you press the FINALIZE button with a
DVD-RAM loaded in this DVD video camera/recorder. No
finalization is necessary for a DVD-RAM.
END OF CARD
No more recording on this card can be done: Delete unnecessary
stills or use another card.
Error occurred. Please
format HDD.
An error occurred with the HDD for which repair is being tried.
Initialize the HDD: But note that initializing the HDD will delete all
data stored on the HDD.
Error occurred. Please
replace DVD or format
DVD.
• Abnormality has occurred with the DVD-RAM/DVD-RW/+RW
to be repaired. Initialize the disc before using it, or use the
another disc. Initializing the disc will erase all data on it.
• See *2 on
.
Error occurred. Please
replace DVD.
An abnormality occurred with a DVD-R to be repaired. Replace
the disc.
—
Finalize may not be
complete. Finalize again
now?
This message will appear when power is supplied again and the
disc is reinserted after power was shut off during finalization due
to a power failure, etc. Choose “YES” if you wish to be sure
finalizing is performed.
HDD/DVD ALMOST
FULL
The remaining free space of HDD/disc is less than one minute for
video: Delete unwanted scenes, or use another disc.
HDD full.
Cannot execute.
Delete unwanted scenes.
HDD/DVD has no data.
This message will appear when an attempt is made to execute
playback or editing on Disc Navigation with no scene recorded.
—
HDD/DVD has no
PlayList.
Switching of play list was selected with no play list stored.
HDD/DVD includes
protected scenes.
Delete scenes?
The disc may be software protected from a device other than this
DVD video camera/recorder. To release this case, use a device
that has executed software-protect.
—
HDD/DVD is full.
Cannot add control info.
The number of entered scenes has reached the limit that can be
entered, so the control information for generating thumbnails
cannot be added.
Combine several scenes or delete them.
HDD error has
occurred.
Initialize the HDD before using the DVD video camera/recorder.
Initializing the HDD will delete all data recorded on it.
HDD error has
occurred.Format the
HDD now?
Did you interrupt formatting the HDD?
Choose “YES”, and then format the HDD.
Initializing the HDD will delete all data recorded on it.
HDD error has
occurred.Formatting is
not complete.
Did you interrupt formatting the HDD?
Press the RESET button to execute system reset.
Message
Cause & Troubleshooting
Reference
page
DZ-HS500A_US.book 142 ページ 2007年1月15日 月曜日 午後5時0分