beautypg.com

Operating instructions, Cycle selection, Soil level – Hotpoint HDA2600K User Manual

Page 4: Pots & pans, How to operate the, Step 1, Step 2, Step 3 select desired wash cycle, Step 4 select a soil level

background image

How to operate the

SELECTED
CYCLE
INDICATOR
LIGHTS

STEP 1

Load your dishwasher with dishes,
silverware, pots, pans, bowls, etc.
according to instructions on pages

14 through 16.

STEP 2

Add detergent to the detergent
dispenser.

Use rinse aid agent to help prevent

spotting. (See page 12.)

Close and latch dishwasher door.

STEP 3
Select desired wash cycle

Touch the center of the pad.

&

PANS

is for items

such as pots, pans and casseroles.
Everyday dishes may be included,

. NORMAL WASH

is for loads of

everyday dishes with medium soils.

Designed to yield high performance

on normal loads.

SHORT WASH is

for most loads

of everyday dishes with light soils
or soils that have not dried on. It

saves hot water over the higher
performance cycles, thus saving

energy. Pre-rinse

before

loading.

CHINA-CRYSTAL

is for lightly

soiled china and crystal. The wash
action is

by pumping air

along with the water to protect your
delicate items. Pre-rinse
before loading.
Follow loading

instructions on pages 14 through 16.

RINSE & HOLD

is for rinsing

partial loads which will be washed
later.

use detergent. Do not

use DELAY

with this cycle.

To

change a setting,

just touch

desired pad.

Your dishwasher is now automatically
programmed including a Soil Level
Selection. Cycle Indicator Lights
tell you the complete program.
And a number in the SYSTEMS

(at right) will tell you

how long the cycle will take. If
you’re satisfied, just touch the

START pad.

STEP 4
Select a soil level

If you wish to make program
changes, start with the soil level.

You should select a change within
30 seconds, otherwise all panel
lights will go out. To relight, touch
any pad or open and

door.

MEDIUM SOIL

is automatically

programmed when a cycle is
selected. You may want to change
the selection depending on the soil
on your dishes.

HEAVY SOIL should be

selected when dishes are extra
soiled or extra greasy. This gives

dishes an extra rinse in every cycle
except RINSE HOLD. This

lengthens cycle.

LIGHT SOIL

will save time and

money if you pre-rinse your dishes.
This shortens all cycles except
RINSE & HOLD.

4