Hotpoint HDA2600K - Manual (Page 14)

How to load your dishwasher
is a random mixed load, the most common type you OUT FOR
will have.
The washer tower rises through the center of the bottom
Make sure dishes are properly loaded to insure that rack during the wash and rinse portions of the cycle.
water can reach the soiled surfaces. The wash arm in the Don’t block it or load next to it. Also. be
bottom sprays water up. The tower that rises in the
center sends water out over the dishes to wash the items
in the upper rack. On some models, a spray arm in the
top washes down also. Make sure to place tall items to
the outside so the upper wash arm is not blocked.
How to load the RACK
careful not to let a portion of an item such as a pot or
dish handle extend through the bottom rack. This could
block the wash arm and cause poor washing results.
The top rack is best for glasses, cups and saucers.
Two rows of cups can be washed when using the folding
Load the bottom row first, then down the
shelf and load the top row. Cups and glasses fit best
along the sides. This is the place for dishwasher-safe
plastics, too. Make sure small plastic items are lodged
in tightly so they can’t fall onto the
heating
unit. Arrange stemware so that it cannot move easily.
Don’t let the glasses touch each other.
14
Sauce pans, mixing bowls and other small items may be
placed—face down—in this top rack. The top rack is
handy for all kinds of odd shapes.