beautypg.com

HP Home PC User Manual

Page 15

background image

Filename: MB2NAodm.doc Title: HP-Print2k.dot
Template: HP-Print2K_vertical.dot Author: billm Last Saved By: pam
Revision #: 13 Page: 15 of 18 Printed: 07/15/02 12:50 PM

AC Power Safety Warning

Warning:

Install the computer near an AC outlet. The AC

power cord is your HP Pavilion’s main AC disconnecting
device and must be easily accessible at all times. For your
safety, the power cord provided with your system has a
grounded plug. Always use the power cord with a properly
grounded wall outlet, to avoid the risk of electrical shock.

Warning:

Your system is provided with a voltage select switch

for use in a 115 or 230 Vac power system. The voltage select
switch has been pre-set to the correct voltage setting for use
in the particular country/region where it was initially sold.
Changing the voltage select switch to the incorrect position
can damage your PC and void any implied warranty.

Warning:

To reduce the possibility of an electric shock from

the telephone network, plug your computer into the AC outlet
before connecting it to the telephone line. Also, disconnect the
telephone line before unplugging your computer from the
AC power outlet.

Warning:

Always disconnect the modem cord from the

telephone system before installing or removing your
computer cover.

Warning:

Do not operate the computer with the cover

removed.

Warning:

The power supply is not user-serviceable.

To prevent damage to the power supply, have a qualified
person repair or replace it. All other components are
user-serviceable.

Warning:

Electrostatic discharge (ESD) can damage disk

drives, add-in cards, and other components. If an ESD station
is not available, wear a wrist strap attached to a metal part
of the computer. Place cards on a conductive foam pad or
inside the card wrapper, if possible, but never on the card
wrapper.

Warning:

For your safety, always unplug the system

from its power source and from any telecommunications
systems (such as phone lines), networks, or modems before
performing any of the procedures described in this guide.
Failure to do so may result in personal injury or equipment
damage. Hazardous voltage levels are inside the power
supply and modem of this product.