Hunter Fan TypeB - Manual (Page 2)

2
41847-01 • 05/28/10 • Hunter Fan Company
Table Of Contents
Preparing the Fan Site . . . . . . . . . . . . . . . . . 3
1 • Getting Ready . . . . . . . . . . . . . . . . . . . . . . 6
2 • Installing the Ceiling Plate . . . . . . . . . . 7
3 • Assembling and Hanging the Fan . . . 8
4 • Wiring the Fan . . . . . . . . . . . . . . . . . . . . . 9
5 • Installing the Canopy and Canopy
Trim Ring . . . . . . . . . . . . . . . . . . . . . . . . . 10
6 • Assembling the Blades . . . . . . . . . . . . . . 11
7 • Completing Your Installation With or
Without a Bowl Light Fixture . . . . . . 12
8 • Operating and Cleaning Your
Ceiling Fan . . . . . . . . . . . . . . . . . . . . . . . . 16
9 • Troubleshooting . . . . . . . . . . . . . . . . . . . . 17
© 2010 Hunter Fan Company
Welcome
Your new Hunter
®
ceiling fan is an addition to your home or office that
will provide comfort and performance for many years . This installation
and operation manual gives you complete instructions for installing
and operating your fan .
We are proud of our work . We appreciate the opportunity to supply
you with the best ceiling fan available anywhere in the world .
Before installing your fan, for your records and warranty assistance,
record information from the carton and Hunter nameplate label
(located on the top of the fan motor housing) .
Cautions and Warnings
• READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING
INSTALLATION. SAVE THESE INSTRUCTIONS.
• Use only Hunter replacement parts .
• To reduce the risk of personal injury, attach the fan directly to the
support structure of the building according to these instructions,
and use only the hardware supplied .
• To avoid possible electrical shock, before installing your fan,
disconnect the power by turning off the circuit breakers to the
outlet box and associated wall switch location . If you cannot lock
the circuit breakers in the off position, securely fasten a prominent
warning device, such as a tag, to the service panel .
• All wiring must be in accordance with national and local electrical
codes and ANSI/NFPA 70 . If you are unfamiliar with wiring, use a
qualified electrician .
• To reduce the risk of personal injury, do not bend the blade
attachment system when installing, balancing, or cleaning the fan .
Never insert foreign objects between rotating fan blades .
• To reduce the risk of fire, electrical shock, or motor damage, do not
use a solid-state speed control with this fan . Use only Hunter speed
controls .
• This product conforms to UL STD 507 and is certified
to STD C22 .2 No .113
• Wash your hands after your fan installation is complete .