Hunter Fan TypeB - Manual (Page 13)

13
41847-01 • 05/28/10 • Hunter Fan Company
Lower Switch
Housing
Plug
Connector
Housing
Assembly Screw
Plug
Connector
Detail
Steps 7-6 – 7-7
7-6 . To attach the lower switch housing, connect the upper plug
connector from the motor to the lower plug connector in the
lower switch housing assembly .
Note: Both plug connectors are polarized and will only fit together
one way . Make sure the connectors are properly aligned before
connecting them . Incorrect connection could cause improper
operation and damage to the product .
7-7 . Place the lower switch housing assembly over the upper switch
housing . Align the side screw holes in the upper and lower switch
housings . Attach the lower switch housing to the upper switch
housing with three housing assembly screws .
If you are not installing the light fixture, your installation is
complete. Otherwise, proceed with step 7-8 .
7-8 . The last installation step when installing the light fixture is to
install the glass bowl . See “Installing the Glass Bowl” on page 13 for
instructions .
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)