Hunter Fan TypeB - Manual (Page 15)

15
41847-01 • 05/28/10 • Hunter Fan Company
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-16 . First install B10 candelabra bulbs (60 Watt Maximum) into the
sockets .
7-17 . Attach the extra pull chain (included) to the fan pull chain using
the breakaway connector . (You may find the breakaway connector
on the end of the extra chain .)
7-18 . Thread the fan pull chain through the hole in the metal disk . Then,
thread the fan pull chain through the hole in the center of the glass
bowl .
7-19 . Thread the light pull chain through the hole in the center of the
glass bowl . Then, Thread the light pull chain throught the hole in
the center of the cover plate .
7-20 . Thread the fan pull chain through the grommet hole in the side of
the cover plate .
7-21 . Place the cover plate up against the
glass bowl . Align the holes in the cover
plate and glass bowl .
7-22 . Thread the light pull chain through
the finial and screw the finial onto the
threaded rod end until tight .
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Metal Rod
Metal Disk
Glass Bowl
Cover Plate
Finial Breakaway
Connector