Hunter Fan TypeB - Manual (Page 14)

14
41847-01 • 05/28/10 • Hunter Fan Company
Installing the Light Fixture
7-9 . Remove the switch housing cap and plug button from the lower
switch housing .
7-10 . Push the wires from the light kit through the hole in the
center of the lower switch housing .
7-11 . Screw the threaded rod of the light fixture into the lower
switch housing .
7-12 . Install the nut and washer from the end of the light fixture
inside the lower switch housing .
7-13 . Remove the wire connectors from the white wire and the
red wire in the lower switch housing .
7-14 . Connect the white wire from the lower switch housing to
the white wire from the light fixture .
7-15 . Connect the red wire from the lower switch housing to the
black wire from the light kit fixture .
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Lower Switch
Housing
Threaded Rod
Steps 7-17 – 7-19
Step 7-21
Cap
Plug Button
CAUTION: Be sure no bare wires or wire strands are visible
after making connections.
Note: In compliance with US federal energy
regulations, this ceiling fan contains a
device that restricts its light output .
Exceeding the wattage limit marked on
the MAX wattage sticker affixed to the
light socket(s) may result in fire hazard
or improper operation . If lights do not
appear to be operating properly, see the
troubleshooting section .