Hobie HCE 2010 - Manual (Page 23)

Ref : MA_WILDCAT_FR Issued by : Alban ROSSOLLIN Date : mars 2010 Up-date : 3 Page 23/49
ASSEMBLY MANUAL : HOBIE WILD CAT
Copyright HCE 2010
3. Installation of the spinnaker halyard
Insert the thin part of the spinnaker halyard into the spinnaker
turret cleat (F) at the base of the mast.
Take it up the mast passing inside the left spreader (G), pass
through the pulley at the top of the mast (H), back down along the
mast (I) and fix it on the turret cleat for the moment (F) without
passing back through spreader bars.
4. Installation of the jib halyard
The jib halyard is pre-assembled on the strap. Pass the jib rigging
halyard (J) through the pulley situated at the end of the jib halyard
and attach as shown in the photo. Attach the other end to the
spinnaker turret cleat for the moment (F).
…/…
G
I
H
J
Preparing the mast
F
G