Hobie Sail Adapter - Manual

Tandem Mirage
Sail Adapter
WWW.HOBIECAT.COM
Step 5: Run the
main sheet from the
sail side,through the
rear pad-eye,and up
through the left clip
on your seat. This
configuration allows
you to steer with your
right hand and
control the sail with
your left. For serial numbers 1543
and smaller
Tandem
Mirage
Sail
adapter
Serial
Numbers
1543
and
smaller
Step 2: Consult Sail Kit
instructions for sail
assembly.
Step 1: Flip up
front seat of kayak
and insert adapter
into scupper.
Congratulations on purchasing the
Tandem Mirage Sail Adapter Kit.
Follow these simple installation
instructions and you'll be out on the
water in no time.
Step 3: Slide down haul
hook up the bottom of the
mast approximately 10
inches,then tighten screw
to secure the hook.
Once tightened,stretch
bungee at base of sail
onto the down haul hook.
Step 4: Slide mast into
adapter.