Hoover 53395 - Manual (Page 6)

Questions or Concerns?
Hoover Company wants to quickly resolve any concerns about your
cleaner or questions regarding its use. Look on the list provided with the
product for your local Hoover Factory Service Center or in the Yellow
Pages under “Vacuum Cleaners Household” for the nearest Authorized
Hoover Warranty Service Dealer (Depot) or call:
l-800-944-9200 for an automated referral of
authorized service (U.S. only)
I-330-499-9499 to speak with a representative in the
Hoover Consumer Response Center.
DO NOT RETURN THIS PRODUCT TO THE STORE OR SEND IT TO
NORTH CANTON FOR SERVICE.
How to assemble
Connect hose
insert hose end with cord into
opening of cleaner, lining up largest
projection on hose with largest
notch of opening. Turn hose to the
right to tighten.
When hose is attached properly,
hose cord plug will reach to
receptacle on cleaner.
Insert plug as deeply into the
receptacle as possible.
To disconnect hose, first remove
hose cord plug from receptacle.
Then, depress latch and turn hose
to the left.
2. Attach power nozzle
and extension wands
Attach wand to power nozzle by
fitting button projection on nozzle
connector into opening in spring
latch. Be sure nozzle is locked in
place.
To release, press down on center
of latch and remove nozzle.
5