Hoover 53395 User Manual
Page 15
2. Return nozzle to original
position; and lift off nozzle cover.
MOTOR PULLEY
3. If the belt is not broken, pull it off
the motor pulley.
4. Lift up end of agitator. Remove
old belt from agitator pulley and
replace with new belt.
5. Stretch belt back and attach to
motor pulley.
Hold opposite end of agitator in
place. Push belt end forward,
rotating end plate until it slides into
place. Turn agitator, making sure it
rotates freely.
14
This manual is related to the following products:
See also other documents in the category Hoover Vacuums:
- Windtunnel UH70120 (45 pages)
- S1029-075 (15 pages)
- Wet/Dry Vacuum cleaner (9 pages)
- WindTunnelTM (13 pages)
- WindTunnel UH70200 (45 pages)
- LiNX (2 pages)
- C1433010 (12 pages)
- WindTunnel Bagless Canister Cleaner with Powered Nozzle (12 pages)
- TurboPOWER (15 pages)
- S3083-030 (20 pages)
- C1404 (20 pages)
- WindTunnel Wind Tunnel Canister Cleaner with Powered Nozzle (12 pages)
- Road Rat Wet & Dry Cleaner (16 pages)
- C1631 (12 pages)
- lV (24 pages)
- WindTunnel UH70105 (45 pages)
- HandVac (8 pages)
- Vacuum Cleaner (48 pages)
- SpinScrub Floor Mate Spin Scrub Hard Floor Cleaner (44 pages)
- Deep Cleaner (15 pages)
- ightweight Cleaner (16 pages)
- SteamVac F5910-900 (40 pages)
- 56511A46 (48 pages)
- QS Quiet (20 pages)
- S3237 (25 pages)
- 53439 (20 pages)
- Platinum Collection BH50000 (2 pages)
- Steam cleaner (9 pages)
- Elite Rewind Upright Cleaner (24 pages)
- WindTunnel Self-Propelled Powered Hand Tool (32 pages)
- PLATINUM Cordless Stick Vac (2 pages)
- E1 (38 pages)
- LiNX BH50030 (16 pages)
- Vacuum Systems (11 pages)
- 59144003 (2 pages)
- Upright Bagless Vacuum Cleane (15 pages)
- Deep Cleaner with Auto Rinse SteamVacuum (17 pages)
- Commercial Lightweight Cleaner with Dirt Cup (8 pages)
- Lightweight Commercial Cleaner (9 pages)
- S3755050 (11 pages)
- WindTunnel vacuum cleaner (12 pages)
- Self-Propelled WindTunnel Cleaner (13 pages)
- C1415 (20 pages)
- WindTunnel (12 pages)
- 1100 (16 pages)