Hoover 53395 - Manual (Page 10)

To connect and
remove tools
To connect tools, insert end of tool
into extension wand and snap into
position. To disconnect, press
down on the center of the spring
latch and remove tool.
Tools attach to hand grip by
rotating plastic ring until slots in the
opening align. Insert tool and turn
latch ring, as shown, to lock tool in
place.
To remove tool, reverse the above
procedure.
The power cord leading from hose
connection to receptacle on
cleaner base need not be con-
nected when using the cleaning
tools. However, to avoid damage
to cord, leave cord connected to
receptacle.
To clean stairs
Clean stairs by placing cleaner on
end as pictured in the illustration.
Clean stairs from bottom to top.
9