beautypg.com

Step 4, Choosing a washing programme selecting a prewash, Washing weight loads – Hotpoint WD72 User Manual

Page 5: Interlocking door system

background image

Choosing a Washing Programme

Selecting a Prewash

IMPORTANT INFORMATION:

The temperature of the incoming water supply and selection of any Optional Wash Feature will affect the

programme times.

WASHING

WEIGHT LOADS

Two examples of
typical loads for
washing different
types of fabric:

2

Bath Towels

6

Shirts

6 Blouses
2

Set of Pyjamas

4

Sets of Underwear

2

Pillow Cases

COTTON

= 5kg

2

Children’s Dresses

4

Shirts

4 Blouses
1

Set of Pyjamas

4

Sets of Underwear

SYNTHETIC

= 3kg

For heavily soiled loads, press and hold the required wash pro-
gramme button until a second beep is heard, the infobubble™
will display ‘Prewash’ and .

To cancel press the wash programme button a third time and a
beep will be heard.

ITCL

Codes Fabric

Temp. Full

Programme

Approx. Max

˚C

Load

Time (mins)

Spin Speed

based on hot

depending

and cold fill

on model

White Cotton & Linen
without special finishes.

95

5kg

120 - 140

1200rpm

Colourfast cotton, linen or
viscose without special finishes 60

5kg

150 - 170

1200rpm

Non-colourfast cotton, linen
& viscose

40

5kg

70 - 80

1200rpm

Coloured nylon, polyester,
acrylic/cotton mixtures, cotton
or viscose with special finishes
(eg. drip dry), coloured
polyester/cotton mixtures

50

3kg

60 - 70

900rpm

Acrylics, acetates & tri-acetate
blends of these fabrics with
wool, polyester/wool blends

40

3kg

50 - 60

900rpm

Woollen blankets, wool
mixtures with cotton, rayon
or silk.

40

2.7kg

55 - 65

900rpm

Shrink resistant machine
washable wool

40

1.4kg

40 - 50

900rpm

Silk & printed acetate fabrics
with colours not fast at 40˚

30

1.4kg

35 - 40

900rpm

Refresh programmes

warm

0.9kg

30 - 35

900rpm

For gentle wash, rinse & spin options see STEP 7

A

B

C

D

E

F

G

Button Selection:

To select, press button.
Press again to cancel.

Interlocking Door System:

To Open...
Grip the door handle and press the button whilst pulling open the door.

To Close...
Apply pressure at the 2 o’clock position until the door clicks.

Indicator Light...
When ‘START’ is pressed the door will lock and a symbol will be
displayed in the Infobubble™ throughout the programme.
Approximately 1-2 minutes after the programme has finished the
symbol will disappear and the door can be opened.

WARNING: Do not attempt to open the door whilst the symbol is
displayed in the infobubble™

STEP 4