Curl or wave, Wrinkles or creases, For more – HP 1022 User Manual
Page 85: Page skew
Page skew
●
Make sure that the media is loaded correctly
and the media guides are not too tight or too
loose against the media stack. See
for more
information.
●
The input bin might be too full. See
for more
information.
●
Check the media type and quality. See
for more
information.
Curl or wave
●
Check the media type and quality. Both high
temperature and humidity cause media to
curl. See
more information.
●
The media might have been in the input tray
too long. Turn over the stack of media in the
tray. Also, try rotating the media 180° in the
input tray.
●
The fuser temperature might be too high. In
your printer driver, make sure that the
appropriate media type is selected. If the
problem persists, select a media type that
uses a lower fuser temperature, such as
transparencies or light media.
Wrinkles or creases
●
Make sure that media is loaded properly.
See
Loading media into the input trays
more information.
●
Check the media type and quality. See
for more
information.
●
Turn over the stack of media in the tray.
Also, try rotating the media 180° in the input
tray.
●
For envelopes, this can be caused by air
pockets inside the envelope. Remove the
envelope, flatten the envelope, and try
printing again.
ENWW
Improving print quality
77