Hunter Fan ELLIPSE 90063 - Manual (Page 15)

C30
E1
Go to step
on page 18
to attach grille.
C27
I
C28
ON
OFF
C29
EXISTING FAN
D11
E
D12
Secure the motor by tightening the 2 screws.
15
Test the motor. If the motor does not run, check the plug
connection.
Turn on the power source.
Existing Construction – accessible only from below
Remove an existing fan and check to make sure the open-
ing is large enough to accommodate the new motor hous-
ing (9”x 9.75”).
Move the housing into position above the ceiling
41722-01 3/29/2006 41722-01 3/29/2006
41722_EngS_3.29.03.indd 15 3/29/06 10:55:14 PM