Hunter Fan ELLIPSE 90063 - Manual (Page 12)

9” 9.7
5”
C12
D
E
5/8
1/2
5/8
1/2
C13 C14
C15
1/8" Bit
C16
Cut out an opening for the housing. Slide the mounting rails into brackets.
Position the correct depth mark at the bottom edge of the
joist based on the thickness of your sheetrock.
Mark position of screws by using holes as a template.
Drill a hole in the center of each outline. Insert screws, leaving space between the screw head
and the joist. Screws are not provided.
12 41722-01 3/29/2006 41722-01 3/29/2006
41722_EngS_3.29.03.indd 12 3/29/06 10:55:05 PM