Hunter Fan ELLIPSE 90063 - Manual (Page 10)

B20
F
1
2
F
•
B21
G
B22
B23
H
B24
H
B25
I
Install the wiring cover plate. Make sure all
wiring connections are inside the box or under
the wiring cover plate.
Tighten the wiring cover plate screw.
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched
between the motor and the housing.
Secure the motor by tightening the 2 screws.
Connect 4” duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may need
to be purchased.
Connect wiring from the motor to the wiring cover plate.
10
41722-01 3/29/2006 41722-01 3/29/2006
41722_EngS_3.29.03.indd 10 3/29/06 10:54:59 PM