Hitachi 5000 - Manual (Page 22)

- 2-2 -
Chapter 2
Placing and
Receiving Calls
Switching the Power On/Off
Power ON
Switching on the power for this product
Power OFF
Switching off the power for this product
1
With the power Off, if you hold down the key for at least 3 seconds, a screen like
that in the figure on the right is displayed and the power comes On.
The messages "Waiting…", "Loading…", and "Running…" are displayed in
order. This processing takes a few seconds.
If the power supply does not come On charge the battery.
2 The standby screen is displayed.
1
With the power On, if you hold down the key for at least 3 seconds, a screen like
that in the figure on the right is displayed and the power goes Off.
After you switch off the power, you cannot switch it back on again for 3 seconds.