Husqvarna 325P4 - Manual (Page 2)

2
– English
Symbols
SYMBOL EXPLANATION
Read through the Operator‘s Manual
carefully and understand the content
before using the machine.
• Use anti-slip and stable boots.
• Always wear approved protective
gloves.
Always use
• A protective helmet where there is
a risk of falling objects
• Ear protection
• Approved eye protection
• This product is in accordance with
applicable CE directives.
Other symbols/decals on the machine refer to
special certification requirements for certain
markets.
• Checks and/or maintenance should
be carried out with the engine
switched off, with the stop switch
in the STOP position.
• Always wear approved protective
gloves.
• Regular cleaning required.
• Ocular control.
• Approved eye protection must
always be used.
• This machine is not electrically
insulated. If the machine touches
or comes close to high-voltage
power lines it could lead to death
or serious injury. Electricity can
jump from one point to another by
arcing. The higher the voltage, the
greater the distance electricity can
jump. Electricity can also travel
through branches and other
objects, especially if they are wet.
Always keep a safe distance of at
least 10 m (30 ft) between the
machine and high-voltage power
lines and/or any objects that are
touching them. If you need to
work closer than this always
contact the relevant power
company to make sure the power is
switched off before you start work.
• This machine has a long reach.
Make sure that no people or
animals come closer than 15 m (45
ft) when the machine is running.
• Chain oil and chain oil flow
adjustment
WARNING! This machine can be
dangerous. Careless or incorrect use
can result in serious or fatal injury to
the operator or others.