Assembly – Husqvarna 325P4 User Manual

Page 18

– English

ASSEMBLY

Assembling and dismantling the
two-part shaft (325P5)

Assembling:

• Make sure the handle is

loose.

• Guide the cut-out on the

lower section of the shaft
into the coupling‘s
locking plate on the
upper section of the
shaft. The sections are
then locked together.

• Tighten the handle.

Dismantling

• Undo the handle (at least

three turns).

• Press the handle towards

the coupling.

• Carefully twist the lower

section out of the lock.

• Hold both parts of the

shaft and pull out the
lower section from the
coupling.