Harbor Freight Tools DRILL MASTER 96526 - Manual (Page 6)

Page 6 SKU 96526 For technical questions, please call 1-800-444-3353.
• Any power cord must be properly grounded. Ground Fault Circuit interrupter
(GFCi) should also be implemented – it prevents sustained electrical shock.
To reduce the risk of personal injury where the drill bit may contact hidden wiring,
hold the tool by its plastic insulated gripping surfaces. Contact with a “live” wire
will make exposed metal parts of the Cordless Drill/Driver “live” and will shock the
operator.
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities, contains chemicals known [to the State of California] to
cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
Lead from lead-based paints
Crystalline silica from bricks and cement or other masonry products
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles. (California Health &
Safety Code § 25249.5, et seq.)
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. it must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SAVE tHESE InStRuCtIOnS.
gROunDIng
Improperly connecting the grounding wire can result in
electric shock.
Check with a qualified electrician if you are in doubt as to
whether the outlet is properly grounded. Do not modify
the power cord plug provided with the tool. never remove
the grounding prong from the plug. Do not use the tool if
the power cord or plug is damaged. If damaged, have it
repaired by a service facility before use. If the plug will not
fit the outlet, have a proper outlet installed by a qualified
electrician.
grounded tools: tools with three prong plugs
Tools marked with “Grounding Required” have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. if
10.
11.
12.
1.
WARnIng WARnIng