Harbor Freight Tools 50 FOOT DRAIN CLEANER WITH POWER FEED 68285 - Manual (Page 9)

Page 9 For technical questions, please call 1-800-444-3353. Item 68284 68285
Cutting Tool Accessories
There are four Cutting Tools included with each Drain Cleaner. Select the appropriate tool
for the cleaning job and attach to Cable. Each is described in the table below.
Arrow Cutter Boring Bulb Cutter C-Cutter Spade Cutter
Cutter Tool Applications
Arrow Cutter (2 pieces) Starting tool; ideal for cutting and scraping
Boring Bulb Cutter Starting tool; ideal for removing loose objects
C-Cutter Finishing tool; ideal for grease stoppages and cleaning pipe walls.
Spade Cutter Finishing tool; used for scraping the inside edges of pipes.
NOTICE:
If the cause of the obstruction is unknown, use the Boring Bulb Cutter to explore
the obstruction and, if possible, retrieve a piece to inspect. Once you can see the cause of the
obstruction, select the appropriate tool for the job. Run the smallest available tool through the
blockage to allow the backed up water to flow and carry away the debris as the drain is cleaned.
Once the drain is flowing, more appropriate tools can be used on the rest of the blockage.
Keep in mind that the largest tool used should be no bigger than the drain’s inside diameter, minus an inch.
If properly used, the Drain Cleaners and assorted Drain Cleaner Accessories will not damage
a drain that is in good condition and properly designed, constructed, and maintained.
However, if the drain is in poor condition or has not been properly designed, the drain cleaning work
may damage the drain. If possible, visually inspect the drain’s quality before operation.
SAFETY
OPERA
TION
MAINTENANCE
SETUP