Husqvarna 339XP - Manual (Page 39)

English – 39
TECHNICAL DATA
Bar and chain combinations
The following combinations are CE approved.
Saw chain filing and file gauges
EC-declaration of conformity
(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the chain
saw Husqvarna 339XP from 2002’s serial numbers and onwards (the year is clearly stated in plain text on the type plate
with subsequent serial number), is in conformity with the requirements of the COUNCIL’S DIRECTIVES:
- of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.
- of May 3, 1989 ”relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN292-2, CISPR 12:1997, EN608.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive’s (98/37/EC) article 8, point 2c. The certificates for
EC type examination in accordance with annex VI, have the numbers: 404/02/914 - 339XP
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity
with annex V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
The certificates have the numbers: 01/161/044.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna November 21, 2002
Bo Andréasson, Development manager
Bar Chain
Length, inch Pitch, inch Gauge, mm Max. nose radius Type Length, drive links (no.)
13 0,325 1,3 10T Husqvarna H30 56
15 0,325 1,3 10T Husqvarna H30 64
16 0,325 1,3 10T Husqvarna H30 66
18 0,325 1,3 10T Husqvarna H30 72