HONDA SB 2040 - Manual (Page 6)

SB2040 Snowblower Assembly and Installation
Assembly and Installation
Proper installation of the SB2040 includes installing four (4) 26-lb.
counterweights. These counterweights are not included with the
snowblower and must be purchased separately.
1. Remove the lag bolts holding the blower head and the pulley
2. Remove the blower head and pulley assembly from the pallet.
assembly to the shipping pallet.
3. Remove the loose parts box, then inventory the contents.
Inventory Loose Parts
WORM SUPPORT BRACKET L-SHAPED BRACKETS (2)
ANTIFRICTION RING
COUNTERWEIGHT BRACKET
SUBFRAME ASSEMBLY
LIFT PLATE (2)
DISCHARGE CHUTE
HOLD-DOWN BRACKET
WORM GEAR
DISCHARGE GUARD
HANDLE
PUSH FRAME HANDLE SUPPORT
These brackets (and associated hardware) are loosely installed on
the subframe of units with serial numbers from 1000001
-
1000500.
POP 52152 (9610)
5