haier XQB60-C - Manual (Page 6)

Before using Before using Before using Before using
1. The height of the drain hose shall be
less than 10cm, or the drainage will not
be smooth, and cost such long time that
the machine may stop at mid way.
2. Do not ramp or press the drain hose.
If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.
4. If extra drain hose is needed, please
make separate purchase. The inner
diameter of the extra hose shall not
less than 30mm, and the length shall
not exceed 1.5m.
If the extra hose is too long, cut it
either at A or at B point.
Usage of the drain hose
The drain hose shall drain smoothly
Install the outer drain hose
Connect the outer drain hose to the inner drain hose by using the drain hose clamp clip them.
Remarks: The direction of the drain hose can be changed by professional person.