haier XQB60-C - Manual (Page 5)

Adjust the installation position
3
Please install and adjust the machine according to the requirement of the manual, which is very
important for you to operate the machine safely and properly.
Safety precautions
Before using Before using Before using Before using
The largest allowable slope of the shank base
of the machine is 2
. The slanting or rough
ground will result in unstable running or
stoppage of the machine. Please adjust it with
following methods:
Adjust the adjustable leg:
1.To twist the adjustable leg, please first lift up the
leg side slightly, loosen the adjustable nut, and
then twist the leg.
2.After adjustment, fasten the nut.
Loosen
Fasten
High Low
Adjustable nut
Adjustable leg
Insert the bottom of the lint filter
( marked with down side ) into
the filter frame, then push the
upper part of the filter in ( marked
with up side ).(See to Figure )
Install the lint filter
Install the bottom plate
After opening the package, please lean the
washing machine gently down on soft items
(like towel cloth, blanket, etc.). Install the
bottom plate to the bottom of the machine
with one screw by a cross screwdriver,
then lift the machine up gently. See to the
figure: