Harbor Freight Tools 66187 - Manual (Page 2)

Page 2 For technical questions, please call 1-800-444-3353. Item 66187
Specifications
Weight Capacity 250 lb.
Arm Width 19″-34″
Rack Height 53″
Important Safety Information
Installation Precautions
1. Follow DOT regulations regarding
installation and use.
2. Verify that installation surface has no hidden
utility lines before drilling or driving screws.
3. Install only according to these instructions.
Improper installation can create hazards.
4. Wear ANSI-approved safety goggles and
heavy-duty work gloves during installation.
5. Keep installation area clean and well lit.
6. Keep bystanders out of the area during installation.
7. Do not install when tired or when under
the influence of drugs or medication.
8. Weight capacity and other product capabilities apply
to properly and completely installed product only.
Use Precautions
1. Do not exceed listed weight capacity,
distributed evenly. Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
2. Strap ladder securely to rack.
3. When expanding the Arm (6), leave at
least 2.5″ of the tube in the Frame (1).
4. Use as intended only.
5. Inspect before every use; do not use
if parts loose or damaged.
6. This product is not a toy. Do not allow
children to play with or near this item.
7. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.