Hotpoint WT640 - Manual (Page 9)

9
GB
8. In addition to showing you
the wash temperature and
spin speed for your selected
programme, the digital
display will show you the
time remaining until the end
of the programme.
- If ‘Time Delay’ option was selected the display will
show the remaining until the start of the wash
programme.
9. StartIthe programme by pressing
the Start/Cancel button for
at least 3 seconds.
The ‘Door Locked‘ indicator will light up.
• To stop/change a programme once the machine
has started:
- Press the Start/Cancel button for 3 seconds.
- Select ‘Pump Out ’ on the Programme selector
dial.
•
When the machine has finished emptying:
- Turn the Programme selector dial to the new
programme required (you may need to add
detergent).
- Press the Start/Cancel button to start the new
programme.
10. During the programme,
the status indicator lights
will show you what stage
in the programme
the machine has reached
(wash, rinse, spin).
11. A short time after the
programme has finished the
‘Door Locked‘ indicator will
go out and you can open the
machine door.
12. Switch the machine off by pressing the On/Off
button.
ogrammesand OptionModifiers
Panel
Starting a Programme
! Do not allow children to play with the machine or
tamper with the controls.
! Do not overload the machine. This may damage the
laundry and reduce the quality of the wash.
The maximum load is 7 kg (Cotton).
! Do not try to open the dispenser drawer during
anyprogramme.
! Do not try to open the machine door when the ‘Door
Locked ’indicator is lit.
Starting a typical wash programme
1. Switch the machine on by
pressing the On/Off button.
2. Sort your laundry into
groups by washcare labels.
Load the machine.
Close the machine door by
pushing it until it clicks.
3. Add detergent and
fabric conditioner
to the dispenser drawer.
! Refer to detergent
manufacturer’ s dosage
instructions.
4. Turn the programme
selector dial to the
required programme.
5.Select any optional
wash feature(s)
(see Option Modifiers ) you
require by pressing the
appropriate button(s).
-Indicator lights will show
what you have chosen.
6. Reduce the programmes wash temperature:
- Press the Variable Temperature button, each press will
reduce the wash temperature by 5°C.
The new temperature will be shown in the display.
7. Reduce the programmes spin speed:
- Press the Variable Spin Speed button, each press will
reduce the spin spin speed.
Start/
Cancel
Start/
Cancel
On/Off