Step 1: base configuration – HP Computer Parts User Manual
Page 7
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration
Models
HP ProLiant ML115 NHP CTO Chassis (North America)
439138-B21
Factory Integrated Models ship with:
Embedded NC320i PCI Express Gigabit Server Adapter
Keyboard and Mouse
370 Watts, PFC (Power Factor Correcting)
Tower Form Factor (4U)
NOTE: HP SATA Drive Models are limited to <2TB support.
NOTE: On SATA models with embedded RAID, setup instructions are located in User Guide, CTO
RAID is set-up not available. HP ProLiant 100 Series Server User Guide:
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
Processors
AMD Athlon Processor Model 3500+ (2.2 GHz) Option Kit, FIO
440962-L21
AMD Opteron™ Processor Model 1220SE (2.8 GHz) Option Kit, FIO
437376-L21
AMD Opteron Processor Model 1216 (2.4 GHz) Option Kit, FIO
437375-L21
AMD Opteron Processor Model 1214 (2.2 GHz) Option Kit, FIO
437374-L21
AMD Opteron Processor Model 1210 (1.8 GHz) Option Kit, FIO
437373-L21
Memory
2 GB Unbuffered PC2-5300 ECC DIMM (1 x 2 GB)
432806-B21
1 GB Unbuffered PC2-5300 ECC DIMM (1 x 1 GB)
432804-B21
512 MB Unbuffered PC2-5300 ECC DIMM (1 x 512 MB)
432803-B21
Hard Drives
Serial ATA (SATA) - Non-hot Plug HDD
HP 500GB 1.5G SATA 7.2K NHP 3.5" HDD, FIO*
404469-B21
HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD
411276-B21
HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD
411275-B21
HP 80GB 1.5G SATA 7.2K NHP 3.5" HDD
383410-B21
*NOTE: Factory Integrated Only
HP Non-Hot Plug SATA Cable
NOTE: The purchase of a SATA Hard Disk Drive requires the purchase of HP
SATA Cable option kit (P/N 442901-B21).
442901-B21
Serial Attached SCSI (SAS) Non-Hot Plug
HP 300GB SAS 3.5" 15K NHP
431950-B21
HP 146GB SAS 3.5" 15K NHP
432093-B21
HP 72GB SAS 3.5" 15K NHP
432095-B21
Optical Drives
CD-RW/DVD-ROM Combo Drive Option Kit
331346-B21
HP DVD+R/RW 8X HH
383974-B21
HP ProLiant 48X CD
398972-B21
DVD ROM Drive 16x
217053-B21
NOTE: For the installation of Windows and other OS's, a floppy drive (DC361B) may be required
to complete driver installation. A USB drive key may not work to complete driver installation.