beautypg.com

Operation, Sleep function, Control panel remote controller – haier AP602AKEAA User Manual

Page 11: Use of sleep function, Operation mode, Before using this function, the clock must be set

background image

Sleep Function

Before using this function, the clock must be set.

Use of SLEEP function

After the unit's start, set running mode and then press SLEEP button once to make the air conditioner
have the previous-set sleep time (first power-on is "1h"). The sleep symbol will appear. Press time
button / : you can choose the time in 1~8 hours. Each time the button is pressed, the time
increases/decreases 1 hour: "xh" and "OFF" indications appear on the display.

Operation Mode

1.In COOL, DRY mode

One hour after sleeping operation start, the
temperature
is 1 C higher than the setting one. After another
hour, temperature rises 1 C: sleep run continuously
for another 6 hours and then stops. The actual
temperature is higher than the setting one which
is to prevent from being too cold to your sleep.

SLEEP RUN BEGINS

SLEEP RUN STOPS

SETTING T

SHUT DOWN

about 6 hrs

1 hrs

In COOL,DRY mode

increase 1 C

increase 1 C

Notes:

After setting SLEEP function, it is not possible to set clock.

If set-sleep time does not reach 8 hours, unit will automatically stop
operation after set time is reached.

Set " TIMER ON " or " TIMER OFF "In COOL,DRY mode function first,
then set SLEEP. After set SLEEP function, the TIMER function cannot
be set.

9

Operation

2.In HEAT mode

One hour after sleeping operation start, the
temperature
is 2 C lower than the setting one. After another
hour, temperature decreases by 2 C more.
Temperature will automatically rise by 1 C after
another 3 hours' continuous operation. The actual
temperature is lower than the setting one which
is to prevent from being too hot to your sleep.

3.In AUTO mode.

The air conditioner will run in corresponding sleep
operation according to the automatically selected
operation mode.

SLEEP RUN BEGINS

SLEEP RUN STOPS

SETTING T

SHUT DOWN

1 hrs

1 hrs

3 hrs

about 6 hrs

increase 1 C

decrease 2 C

decrease 2 C

In HEAT mode

The control panel will display "SLEEP" ON LCD when
SLEEP function set.

Control panel

Remote controller

ON

OFF

TEMP

HEALTH

FAN

MODE

SLEEP

SWING

CLOCK

TIMER

SET

LOCK

LIGHT

RESET

HEAT

SLEEP

ON/OFF

MODE

FAN

TEMP

TEMP+

TEMP-

HEALTH

This manual is related to the following products: