HONDA GX270 - Manual (Page 18)

ENGLISH
Specifications Air Index
Applicable to Emissions Durability
Period Descriptive Term
GX240/GX270 (PTO shaft type S)
GX340/GX390 (PTO shaft type S)
18
355 430 410 mm
(14.0 16.9 16.1 in)
25.0 kg (55.1 lbs)
4-stroke, overhead valve, single cylinder
242 cm (14.8 cu-in)
[73.0 58.0 mm (2.9 2.3 in)]
270 cm (16.5 cu-in)
[77.0 58.0 mm (3.0 2.3 in)]
5.3 kW (7.2 PS, 7.1 bhp) at 3,600 rpm
6.0 kW (8.2 PS, 8.0 bhp) at 3,600 rpm
Forced air
Transistor magneto
Counterclockwise
380 450 443 mm
(15.0 17.7 17.4 in)
31.5 kg (69.4 lbs)
4-stroke, overhead valve, single cylinder
337 cm (20.6 cu-in)
[82.0 64.0 mm (3.2 2.5 in)]
389 cm (23.7 cu-in)
[88.0 64.0 mm (3.5 2.5 in)]
7.1 kW (9.7 PS, 9.5 bhp) at 3,600 rpm
8.2 kW (11.1 PS, 11.0 bhp) at 3,600 rpm
Forced air
Transistor magneto
Counterclockwise
300 hours [0 65 cm (0 65 cc)]
500 hours [greater than 65 cm (65 cc)]
125 hours [0 65 cm (0 65 cc)]
250 hours [greater than 65 cm (65 cc)]
50 hours [0 65 cm (0 65 cc)]
125 hours [greater than 65 cm (65 cc)]
Extended
Intermediate
Moderate
An Air Index Information hang tag/label is applied to engines
certified to an emission durability time period in accordance with
the requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability
to compare the emissions performance of available engines. The
lower the Air Index, the less pollution.
The durability description is intended to provide you with
information relating to the engine’s emission durability period.
The descriptive term indicates the useful life period for the engine’s
emission control system. See your
Emission Control System
Warranty for additional information.
The Air Index Information hang tag/label must remain on the
engine until it is sold. Remove the hang tag before operating the
engine.
5.3 (1.40 US gal , 1.17 Imp gal)
1.1 (1.2 US qt , 1.0 Imp qt)
17.7 N·m (1.80 kgf·m, 13.1 lbf·ft)
at 2,500 rpm
15.3 N·m (1.56 kgf·m, 11.3 lbf·ft)
at 2,500 rpm
6.1 (1.61 US gal , 1.34 Imp gal)
1.1 (1.2 US qt , 1.0 Imp qt)
25.1 N·m (2.56 kgf·m, 18.5 lbf·ft)
at 2,500 rpm
22.1 N·m (2.25 kgf·m, 16.3 lbf·ft)
at 2,500 rpm
The power rating of the engine indicated in this document is the
net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600
rpm (Net Power) and at 2,500 rpm (Max. Net Torque). Mass
production engines may vary from this value.
Actual power output for the engine installed in the final machine
will vary depending on numerous factors, including the
operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
Length Width
Height
Dry mass [weight]
Engine type
Displacement
[Bore
Stroke]
Net power
Max. Net torque
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
Length Width
Height
Dry mass [weight]
Engine type
Displacement
[Bore
Stroke]
Net power
Max. Net torque
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
(in accordance
with SAE J1349 )
(in accordance
with SAE J1349 )
(in accordance
with SAE J1349 )
(in accordance
with SAE J1349 )
GX270
GX240
GX270
GX240
GX270
GX240
GX340
GX390
GX340
GX390
GX340
GX390
07/06/08 09:50:55 32Z5F600_018