Harbor Freight Tools 94280 - Manual (Page 4)

Page 4 SKU 94280 For technical questions, please call 1-800-444-3353.
Use safety equipment. Wear eye protection when assembling this product.
Non-skid safety shoes must be used for appropriate conditions.
TOOL USE AND CARE
Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the Floor Machine. Such pre-
ventive safety measures reduce the risk of starting the unit accidentally.
Store idle equipment out of reach of children and other untrained persons.
Electrically powered products are dangerous in the hands of untrained users.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect this product’s operation. If damaged, have
the Floor Machine serviced before using. Many accidents are caused by poorly
maintained equipment.
SERVICE
Service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
When servicing this product, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
Maintain labels and nameplates on the Floor Machine. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a replace-
ment.
Wear ANSI-approved safety impact eye goggles and non-slip foot-
wear when using the Floor Machine. Using personal safety devices
reduce the risk for injury.
Maintain a safe environment. Keep the area well lit. Make sure there is adequate
surrounding space. Always keep the area free of obstructions, grease, oil, trash,
and other debris. Do not use an electrically powered product in areas near flam-
mable chemicals, dusts, and vapors.
Never leave the Floor Machine unattended when it is plugged into an electrical
outlet. Turn off the Floor Machine and unplug the tool before leaving.
Carefully inspect the condition of the Floor Machine before use, and check
the tool continually during use. If any damage is noted, stop immediately and
repair or replace the Floor Machine.
5.
1.
2.
3.
1.
2.
1.
2.
3.
4.
5.