Harbor Freight Tools 94280 - Manual (Page 2)

Page 2 SKU 94280 For technical questions, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS
Electrical Requirements 115 V~ / 60 Hz / 250 W
Motor
Single Speed / 0.3 HP / 150 RPM
Power Plug/Cord 3-Prong with Ground
18 AWG x 3 C SJTX x 19 Ft.
Dimensions 10” Outside Diameter Base (11” O.D. w/Brush Attached)
8-1/2” Wide at Wheels (9” Wide at Axle)
35” Long Tube Handle w/Yoke
12-1/2” Wide “T” Handle
48-3/4” High (From Floor to Handle)
Accessories 11” Diameter Carpet Brush (Black w/Slip Fit)
11” Diameter Floor Brush (Green/White w/Slip Fit)
12” Diameter Foam Pad (White w/Hook & Loop)
Weight 41 Pounds
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases, or dust. Power tools create sparks which may
ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Provide barriers or shields as needed.
1.
2.
3.