haier DW15-PFE S - Manual (Page 14)

12
Not suitable for the dishwasher
What you should not put into the dishwasher
Cutlery and tableware manufactured in whole or part from wood.They become faded and unsightly in
appearance.Furthermore,the adhesives that are used are not suitable for the temperature that occur
inside the dishwasher.Delicate decorative glassware and vases,special antique or irreplaceable china.
The decorative patterns on such items will not be dishwasher-proof.
Plastic objects that are not resistant to hot water, copper and pewter utensils are also not suitable.
Decorative patterns printed or painted onto the surface of crockery, glasses, etc.,aluminium and silver
items tend to become discoloured or faded if washed in the diswasher. Some types of glass can become
opaque in appearance after they have been washed many times in a dishwasher. Highly absorbent
materials, such as sponges and towels,should never be placed in the dishwasher.
Our recommendation
In future, only purchase table or kitchenware that has been confirmed as being dishwasher-proof.
Important
Dishes or cutlery that have been soiled by tobacco ash, wax,
Iubricating grease or paint, should not be put in the dishwasher.
Possible causes
type of glass or manufacturing process
chemical composition of detergent
water temperature and duration of dishwasher programme.
Use glassware or porcelain dishes that have been marked ‘dishwasher-proof’ by the manufacture.
Use a mild detergent that is described as ‘kind to dishes’. If necessary, seek further information from
detergent manufacturers.
Select a programme with a low temperature and a short duration as possible.
To prevent damage, take glass and cutlery out of the dishwasher as soon as possible after the
programme has ended.
Suggested remedy
Damage to glassware and other dishes
21
Delayed start programming
You can delay the start of a programme in increments of one hour up to 12 hours.
Switch dishwasher ON.
Immediately press the Delayed Start button “ C ”, the delayed start indicator “13” blinks and the
time-remaining indicator “ 10 ” changes to “ ”.
Press the Delayed Start button “C” as many times as necessary until the numerical display shows the
required delay.
To cancel delayed start , press the Delayed Start button “C” until the delayed start indicator “13” goes
out.
Press programme button “ B ” to choose the desired programme.
Press start button “ D ”.
Close the door, the delayed start timer indicator “13” lights, the time-remaining indicator “ 10 “ will be
indicated by decreasing .The programme will start until the delayed start indicator “ 13 ” goes out.
C 10 E
B D
13
C E
B D
10 13