Hunter Fan 44360 - Manual (Page 51)

51
7. Auto recovery – allows heating and cooling systems to gradually
recover from an energy-saving setpoint temperature to a comfort
setpoint temperature. Auto recovery calculates the time needed
to adjust the temperature to the next program setting. When
the thermostat is in Auto Recovery mode, the display will flash
alternating messages of rECO and the time. Auto recovery can
be disabled by sliding the recovery switch on the back of the
circuit board to the disable position.
(Auto recovery will not operate if Permanent or Temporary holds are on.)
Press H
OlD
/R
ETURN
during the Auto recovery process to manually
cancel the recovery.
ICOnS AnD FEATUrES, COnT.