Hunter Fan 44360 User Manual
Page 19
19
ATTACHInG THE THErMOSTAT
lift the thermostat cover and set the
SYSTEM
switch to
OFF
and
the
FAN
switch to
AUTO
.
1. Fan option - locate the
HE/HG
switch on the back of the
thermostat. Set the switch to
HG
(default) for gas furnace and oil
burners. Set the switch to
HE
for electric furnaces. (The switch
has no effect when the system is set to cooling mode.)
2. recovery - locate the
A
UTO
R
EcOvERY
switch on the back of the
thermostat. If you wish to use the Auto recovery feature, verify
that the switch is in the EnABlE position. If you do not wish
to use this feature, simply change the switch to the DISABlE
position. See pages 44-45 for more information.
3. System type - locate the
S
YSTEM
T
YpE
switch on the
back of the thermostat. Select either STD (Standard) or HP
(Heat Pump) to match your system.
InSTAllInG THE THErMOSTAT, COnT.