Changing a flat tire – HONDA 2008 Odyssey User Manual
Page 470
You can store the flat tire on the top
of the folded third row seat.
Pull up the U-shaped carpet piece,
fold it, and tack the end under the
carpet.
Remove the spacer, and unfasten
the plastic screw with a coin.
Place the flat tire face down on the
attachment point. Put the spacer
cone on the flat tire as shown.
Poke holes in the vinyl bag. Secure
the flat tire into the attachment
point by tightening the tire
mounting wing bolt through the
center cap hole of the flat tire
wheel.
Follow step 22 through 26 on
pages
and
.
Store the spacer and the plastic
screw in a noticeable place.
Make sure to reinstall the plastic
screw after the flat tire is repaired
and installed on the vehicle.
Store the wheel cover in the spare
tire storage area.
Install the spare tire storage cover.
Remove the center cap before
storing the flat tire.
Store the spacer, plastic screw and
center cap in a noticeable place.
1.
2.
3.
4.
5.
25.
26.
27.
463
464
On EX, EX-L and Touring models
On LX and Canadian DX models
Storing a Flat Tire on the Folded
Third Row Seat
Changing a Flat Tire
464
TIRE MOUNTING
WING BOLT
ATTACHING POINT
SPACER
PLASTIC SCREW
SPACER CONE
Loose items can fly around the
interior in a crash and could
seriously injure the occupants.
Store the wheel, jack, and tools
securely before driving.