HONDA 2008 Odyssey - Manual (Page 221)

If you set the temperature to its
lower or its upper limit, the system
runs at full cooling or heating only. It
does not regulate the interior
temperature.
Press the Auto button. The
indicator in the button comes on.
Set the desired temperature with
the temperature control button.
You will see AUTO in the system’s
display. You can set the driver’s
side temperature and passenger’s
side temperature and the
temperature of the rear passenger
compartment separately. The
system automatically selects the
proper mix of conditioned and/or
heated air that will, as quickly as
possible, raise or lower the interior
temperature to your preference.
The automatic climate control
system adjusts the fan speed and
airflow levels to maintain the interior
temperature you select.
When you press a fan control button,
the fan is taken out of AUTO mode.
To keep stale air and mustiness
from collecting, you should have
the fan running at all times.
Keep the system completely off
for short periods only.
You can manually select various
functions of the climate control
system when it is in fully automatic
mode. All other features remain
automatically controlled. Making any
manual selection causes the word
AUTO in the display to go out.
Turn the fan speed and temperature
control dials all the way to the left,
and turn the rear controller dial to
the OFF position.
Press the OFF button and the REAR
button (indicator is off).
In AUTO mode, the rear passenger
compartment temperature is also
regulated independently.
In AUTO mode, the vehicle’s interior
temperature is independently
regulated for the driver and
passenger. If the driver’s side of the
vehicle is getting too much sun, the
system will adjust to a lower
temperature.
1.
2.
On EX, EX-L and Touring models
On EX, EX-L and Touring models
On EX, EX-L and Touring models
On models with navigation system
On LX and Canadian DX models
Vents, Heating, and A/C
Using Automatic Climate Control Semi-automatic Operation
To Turn Everything Of f
Fe
a
tu
re
s
215