Husqvarna 16 AWD User Manual
Oper ator ′ s manual
Table of contents
Document Outline
- Contents
- Dear Customer,
- Driving and transport on public roads
- Towing
- Use
- Good service
- Serial Number
- Pre-delivery service
- After the first 8 hours
- Symbols
- Safety instructions
- Driving on slopes
- Children
- Maintenance
- Transport
- Presentation
- Cutting unit
- Lifting lever for the cutting unit
- Cutting height adjustment lever
- Seat
- Fuelling
- Release lever Rider 13 C, Rider 16 C
- Release lever Rider 16 AWD
- Before starting
- Start the engine
- Starting the engine with a weak battery
- Driving the Rider
- Cutting tips
- Starting on a slope, manual gearbox. (Rider 11 R and Rider 11 C).
- Stop the engine
- Maintenance schedule
- Cleaning
- Removing of the machine hoods
- Checking and adjusting the steering wires
- Checking the brake Rider 11 R and Rider 11 C
- Adjusting the brake Rider 11R and Rider 11 C
- Adjusting the parking brake Rider 13 C, Rider 16 C
- Adjusting the parking brake Rider 16 AWD
- Adjusting the throttle wire
- Replacing the air filter
- Replacement of fuel filter
- Checking the fuel pump’s air filter
- Checking the tyre pressure
- Controlling the acid level in a dry- charged battery
- Ignition system
- Fuses
- Check the safety system
- Checking the engine’s cooling air intake
- Checking and adjustment of the cutting unit’s ground pressure
- Checking the cutting unit’s parallelism
- Adjusting the parallelism of the cutting unit
- Service position for the cutting unit
- Checking the blades
- Removing the BioClip plug
- Checking the engine’s oil level.
- Replacing the engine oil
- Checking the oil level in the transmission on Rider 13 C, Rider 16 AWD and Rider 16 C
- Lubricating the belt adjuster
- Lubrication Rider 11 R and Rider 11 C
- General lubrication
- Winter storage
- Guard
- Service
- EC-declaration of conformity (Applies to Europe only)