Hitachi 42PD5000 - Manual (Page 52)

Selected characters Setup hint
Scart Output
TV Monitor
TV:AV4 (Scart) output will be fixed as TV signal output.
Monitor:AV4 (Scart) output can view the image as on the main unit.
But it is possible to monitor only the composite video signal from
AV1, AV2, or AV3 input that is displayed on the screen at the time.
OPERATING INSTRUCTIONS (continued)
SETUP MENU (continued)
Selected characters Setup hint
Auto Tuning
Mode Position Direct
Select the channel entry method between position setting or direct
setting. And press the OK button to fix it.
• If [Position] is selected, the screen display will be numbers (1~199
and AV00).
• If [Direct] is selected, the screen display will be C ✱✱ at the channel
0~99 and S ✱✱ at the channel 100~199.
Search – – Press the OK button and it starts the auto tuning.
Manual Tuning
Position – –
Set the position number(0~199) or channel number(C ✱✱, S✱✱) by ▼
▲ PROGRAM UP/DOWN buttons.
Frequency – –
• If [Position] has been selected, search the frequency here by
pressing buttons.
• If [Direct] has been selected, this function will be not available
(grayed out).
Name
( :a letter)
This is used to input the name of the TV station within 5 letters. After
fixing the cursor on the first digit, select a letter by
▼ ▲ SELECT
buttons and move to next digit by ADJUST button. Press the OK
button again after finished.
• Selectable letters are “0”~`”9”, ”A”~`”Z”, “+”, “–”, ” ”(blank),
”,”(comma) and ”.”(period) .
Sound System
Auto M BG
DK I
Select the sound system through the 5 different settings.
Color System
Auto PAL SECAM
NTSC3.58 NTSC4.43
Select the color system through the 5 different settings.
Skip Off On
If this is set to On, that position will be skipped while selecting
positions by PROGRAM UP/DOWN buttons.
This is automatically set to On for those non-broadcasting channels.
NR Off On If this is set to On, it helps to reduce the noise interference visible on
the screen, especially in the weaker signal reception areas.
Fine Tuning
Decreasing the frequency
data for the main tuner Increasing the frequency
data for the main tuner.
After completing the fine-tuning, press the RETURN button to exit this
mode.
• The variable range is -56 ~ +56.
Sort (When the Mode in Auto Tuning menu is set to [Direct], this function will be not available (grayed out).)
(A Line of position List) – –
Press OK button at the a line that is required to change order, then
the characters will change to green. And move it up or down in the list
by pressing
▼ ▲ SELECT buttons. And press OK button to complete
it. Press the RETURN button to exit.
Auto Off Off On
If this is set to On, the power will be turned off when there is no
transmission signal and no operation for about 10 minutes in the TV
mode.
[During VIDEO signal input]
1 item is added to the Menu shown in the page .
▼
▼