Hitachi 42PD5000 - Manual (Page 17)

Selected characters Setup hint
Contrast
Narrows the gap between
brightness and darkness. Broadens the gap between
brightness and darkness.
Adjust for maximum visibility to suit the ambient brightness.
This can adjust further till [+40] by pressing and holding
cursor
button at [+31]. The color for [+32] to [+40] numbers will change from
white to magenta. This special mode is better for dark scenes.
For brighter scene some parts of the picture might not be clear. We
recommend to set at [+31].
"Panel Life" in the Function Menu should be set to Normal when
Contrast setting is adjusted.
Brightness
Black is subdued for
increased overall darkness. Black is set off for increased
overall brightness. Adjust to taste.
Color Darkens colors. Lightens colors. Adjust to taste.
Tint
Enhances red and weakens
green. Enhances green and weakens
red.
This is not available to adjust when receiving PAL/SECAM signal.
In this case the character will be grayed out.
Adjust for most realistic skin color.
Picture Enhancement
Off Low Middle High
Sets the clarity of small details to the desired level.
Color Temperature
Cool Normal Warm Black / White
Normally set to Normal.
Color Temp. Adjustment Off On Turn On when you wish to change color temperature is required to
adjust depending on the user’s preference.
Amplitude
Red
Brighter scene is decreased in
reddish color. Brighter scene is increased in
reddish color.
Adjust color temperature depending on the user’s preference. These
settings are independently stored in each of the 4 Color Temperature
modes.
Green
Brighter scene is decreased in
greenish color. Brighter scene is increased in
greenish color.
Blue
Brighter scene is decreased in
bluish color. Brighter scene is increased in
bluish color.
Cut Off
Red
Dark scene is decreased in
reddish color. Dark scene is increased in
reddish color.
Green
Dark scene is decreased in
greenish color. Dark scene is increased in
greenish color.
Blue
Dark scene is decreased in
bluish color. Dark scene is increased in
bluish color.
Reset (off the function) (waiting to reset)
The original factory settings for the items of this Menu page can be
restored by pressing the OK button.
ENGLISH
PICTURE MENU
Picture
Audio
Timer
Function
Setup
Language
Select
OK Set Picture
Contrast
: + 31
Brightness : – 31
Color : 0
Tint : + 31
Picture Enhancement : Off
Color Temperature : Normal
Color Temp.Adjust
Reset
Reset
Select Set Return OK
Picture
Contrast
: + 31
Brightness : – 31
Color : 0
Tint : + 31
Picture Enhancement : Off
Color Temperature : Normal
Color Temp.Adjust
Reset
Reset
Select Set Return OK
OK
MENU
Contrast + 31
Next / Prev Adjust Return
OK
OK
OK
Picture
Contrast
: + 31
Brightness : – 31
Color : 0
Tint : + 31
Picture Enhancement : Off
Color Temperature : Normal
Color Temp.Adjust
Reset
Reset
Select Set Return OK
Color Temperature
Normal
Next/Prev Select Return
Picture
Color Temp. Adjust
On
Amplitude
Red – 63
Green 0
Blue – 31
Cut Off
Red + 31
Green 0
Blue + 31
Reset Reset
Select On/Off Return